Overview

Education:

  • Ph.D. in Industrial Engineering, University of Central Florida
  • M.Sc. in Production Engineering, Menoufia University, Egypt
  • B.Sc. in Production Engineering & Mechanical Design, Menoufia University, Egypt

Information

Areas of Research Interest

Quality and Reliability Engineering, Statistical Process Control, Economic Modeling, Economics of Quality, Precision Measurements, Rapid Prototyping and Manufacturing of Composites.

Publications

Books/Book chapters:

  • Elshennawy A. K., and Weheba G. S “Manufacturing Processes & Materials,” 5th ed., Society of Manufacturing Engineers, Dearborn, Michigan (2015).
  • Weheba G., “Quality Systems Development, Implementation, and Verification,” Certified Quality Engineer Handbook, Second edition, Chapter 3, Quality Press, (2001).

Refereed articles in international journals: (Student coauthors identified with *)

  • Al Turk, A* and Weheba G., Restoring Historical Buildings Using Additive Manufacturing, Journal of Management and Engineering Integration, Vol. 17, No. 1, pp 35-44, Summer 2024.
  • Jaradat, B* and Weheba G., A Practical Guide to ISO25022: Measurement of Software Quality in Use, Journal of Management and Engineering Integration, Vol. 17, No. 1, pp 45-52, Summer 2024.
  • Mohammad Kanan1, Ayman Zerban, Salah Abunar, Ameen El Harbi, and Gamal Weheba, Online Education and Managing Service Quality with the Challenges of COVID 19: The Case of University of Business and Technology (UBT) Saudi Arabia, Appl. Math. Inf. Sci. 17, No. 2, pp. 201-207, 2023.
  • Matthew T. Guile* and Gamal Weheba., Implementation and Evaluation of Curved Layer Fused Deposition Modeling, Journal of Management and Engineering Integration, Vol. 16, No. 2, pp 14-22, Winter 2023.
  • Al Turk, A* and Weheba G., Key Barriers to Industry 4.0 in Construction Industry, Journal of Management and Engineering Integration, Vol. 15, No. 2, pp 26-33, Winter 2022.
  • Al Turk, A* and Weheba G., 3D Printing of Portland Cement Using a Binder Jetting System, Journal of Management and Engineering Integration, Vol. 14, No. 1, pp 128-136, Summer 2021.
  • Sari Almutairi* and Gamal Weheba, “Factors Correlating with Revisions of the ISO9001 Quality Management Standard,” Journal of Management and Engineering Integration Vol. 11, No. 2, pp 25-36, Winter 2019.
  • Abdelhakim Al Turk*, and Gamal Weheba, “Applications of Additive Manufacturing in Construction Industry: A Literature Review, The Journal of Management and Engineering Integration Vol. 13, No. 1, pp 32-39, Summer 2020.
  • Abdulaziz G. Abdulaziz* and Gamal S. Weheba, “Performance Characterization of 𝑿̅ Group Control Charts, The Journal of Management and Engineering Integration Vol. 13, No. 2, pp 8-14, Winter 2020.
  • Weheba, G., Cure, L., & Toy, S. (2018). Perceived dimensions of healthcare quality in published research. International Journal of Healthcare Management, 13(sup1), 357–364. https://doi.org/10.1080/20479700.2018.1548156.
  • Mugharbil* H., and Weheba G., “Drivers for Innovation in Small and Medium-Sized Enterprises” Journal of Organisational Studies and Innovation, Vol.5, No. 2, pp. 1-13, 2017.
  • Kanan* M, Weheba G, Assaf R., “Economic Advantages of Utilizing the Integrated Quality Software Development Model,” Industrial Engineering and Management, Vol. 6, No. 1, 2017, doi:10.4172/2169-0316.1000210.
  • Alghamdi* F., and Weheba G., “Economic Approach for Determining the Time Buffer in Synchronous Manufacturing,” The Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 40-50, 2016.
  • Attar* M., and Weheba G., “A Framework for Discovering Customer Requirements,” The
    Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 62-70, 2016.
  • Alotaibi* F., Weheba G. and Toy S., “Quality in Higher Education: Perceptions of Top Administrators,” The Journal of Management and Engineering Integration, Vol. 9, No. 2, pp. 51-61, 2016.
  • Jaradat* B. and Weheba G., “Cost of poor software quality: A literature Review,” Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 41-48, 2015.
  • M. Attar* and G. Weheba., “Dynamic Validation of satisfaction surveys,” Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 57-65, 2015.
  • Algamdi* F. and Weheba G., “Application of the Simplified Drum Buffer Rope in an Assembly Plant,” Journal of Management and Engineering Integration, Vol. 8, No. 1, pp. 1-8, 2015.
  • Kanan* M., and Weheba G., “Development of the Audit-Calc Software System: A Case Study,” Journal of Management and Engineering Integration, Vol. 7, No. 1, pp. 1-11, 2014.
  • Weheba G., and Wuay* C.S., “Improving Dimensional Accuracy of Water-jet Machining,”
    Journal of Management and Engineering Integration, Vol. 5, No. 2, pp. 108-115, 2012.
  • Begum* S., and Weheba G., “Statistical Techniques for Analyzing Customer Feedback,”
    Journal of Management and Engineering Integration, Vol. 4, No.2, pp.129-134, 2011.
  • Safaie* N., and Weheba G., “A Fully Bayesian Approach to Verifying a Shift in the Process Average,” Journal of Management and Engineering Integration, Vol. 4, No.1, pp.129-136, 2011.
    Weheba G., and Khalidi* S., “Economic Feasibility of Utilizing Multivariate Control Charts,” Journal of Management and Engineering Integration, Vol. 1, No. 2, pp.114- 118, 2009.
  • Weheba G., Tola* A., and Masud A., “Economics of Quality Improvement in Manufacturing Processes based on Attributes,” Journal of Management & Engineering Integration, Vol. 1, No. 2, pp. 15-20, 2008.
  • Weheba G., and Minhas* V.,” Ruggedness Evaluation of the Open-Hole Test Procedure,”
    Journal of Management and Engineering Integration, Vol. 1, No. 1, pp. 100-106, 2008.
  • Weheba G., Mahmassani* A., and Malzahn D., “AS9100 Registration Difficulties and Organizational Benefits: A Supplier Satisfaction Survey,” SAE International Transactions, Journal of Aerospace 01-2438, 2007
  • Samarah* I., Weheba G. and Lacy T., “Characterization of the Effect of Material Configuration and Impact Parameters on Damage Tolerance of Sandwich Composites,” SAE International Transactions, Journal of Aerospace, 01-2443, 2007.
  • Self T., Scudder R., Weheba G., and Crumrine* D., “A Virtual Approach to Teaching Safety Skills to Children with Autism Spectrum Disorder,” Topics in Language Disorders, Language, and Learning, Vol. 27, No. 3, pp. 242-253, 2007.
  • Weheba G. and Sanchez* M. A., “Using Response Surface Methodology to Optimize the Stereolithography Process,” Rapid Prototyping Journal, Vol. 12, No. 2, pp. 72-77, 2006.
  • Samarah* I., Weheba G., and Lacy T., “Response Surface Characterization of the Mechanical Behavior of Impact-Damaged Sandwich Composites,” International Journal of Applied Statistics, Vol. 33, No. 4, pp. 427-437, 2006.
  • Cheraghi S.H., Liu* W., and Weheba G.,” An Examination of the Effect of Variation in Datum Targets on Part Acceptance,” International Journal of Machine Tools and Manufacture, Vol. 45, pp. 1037-1046, 2005.
  • Weheba G., and Elshennawy A., “A Revised Model for the Cost of Quality,” International Journal of Quality & Reliability Management, Vol. 21, No. 3, pp. 291-308, 2004.
  • Whitman L., Malzahn D., Madhavan V., Weheba G., and Krishnan K., “Virtual Reality Case Study Throughout the Curriculum to Address Competency Gap,” International Journal of Engineering Education, Vol. 20, No. 5, pp. 690-702, 2004.
  • Weheba G., and Nickerson D., “The Economic Design of x-bar Charts: A Proactive Approach,” Quality & Reliability Engineering International, Vol. 21, pp. 1-14, 2004.

Refereed conference proceedings:

  • Ribas, C* and Weheba G., Control Limits for Monitoring the Average of Correlated Streams, Proceedings of the 6th International Conference on Quality Engineering and Management, pp. 798-813, 2024.
  • Mohammed Al Awadh*, Gamal Weheba, and Deepak Gupta, “Quality in E-learning: Perceptions of Instructors”, IMES 2020 Conference Proceedings pp 5-13.
  • Mohammed Al Awadh* and Gamal Weheba, “Top Administrators’ Perceptions of Quality in E-learning,” ASEE 2019 Conference Proceedings pp 120-131.
  • Miller, L., and Weheba G., “Application of Rapid Prototyping to Support Treatment of Lobule Keloids” Proceedings of the 18th International ICE Conference on Engineering, Technology and Innovation, 2012.
  • Weheba G., Sheikh-Ahmad J., and Tandon S., “Rapid Construction of EDM Electrodes Using Stereolithography,” Proceedings of the Industrial Engineering Research Conference, 2005.
  • Mohamed T., Weheba G., and Masud A., “Economic Design of R-Control Charts: A Proactive Approach,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 447-452.
  • Patel D., Sathaye M., and Weheba G., “Six-Sigma in Small Organizations: A Case Study,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 488-495.
  • Khalidi S., Weheba G., and Jorgensen M., “Quality and Ergonomics: An Interactive Relationship,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2005, pp. 252-261.
  • Weheba G., and Mohamed T., “Economic Design of Control Charts: A Review of Recent Developments,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 429-437.
  • Voth D., and Weheba G., “Partner Selection Methodology for an Agile Supply Chain,” Proceedings of the International Conference on Information Systems in Engineering and Construction, 2004.
  • Deligiannidis L., Weheba G., and Self T., "Utilizing Virtual Reality for Autism Treatment," Proceedings of the International Conference on Imaging, Science and Technology (CISST), 2004, pp. 248-253.
  • Jithavech I., and Weheba G., “Performance Characterization of the Stereolithography Process,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 418-423.
  • Khalidi S., and Weheba G., “Guidelines for Implementing Multivariate Quality Control Charts,” Proceedings of the Annual International Conference on Industry, Engineering and Management Systems, 2004, pp. 424-428.
  • Deshpande S., and Weheba G., “Application of SPC in Stereolithography, Proceedings of the International Conference on Industry, Engineering and Management Systems, 2003.

Conference presentations:

  • Abdelhakim Al Turk, and Gamal Weheba, Binder Jetting Cementitious Materials and Quality of Printed Objects, International Conference on Industry, Engineering and Management Systems, March 6, 2023.
  • Clovis S. Ribas* (P) & Gamal Weheba, Self-starting Q-chart for controlling a multi-stream process - a case study, International Conference on Industry, Engineering and Management Systems, March 14, 2022.
  • Matthew Guile* and Gamal Weheba, “Implementation and Evaluation of Curved Layer Fused Deposition Modeling”, International Conference on Industry, Engineering and Management Systems, March 15, 2021.
  • Zohreh Lamei*, Gamal Weheba and Sue Abdinnour, “Comprehensive Cost Model of Additive Manufacturing”, International Conference on Industry, Engineering and Management Systems, March 15, 2021.
  • Zoherh Lamie* and Gmal Weheba, “Cost Models of Additive Manufacturing: An Overview, presented at the 26th Annual Conference on Industry, Engineering and Management Systems, March 2020.
  • Khunza Meraj* and Gamal Weheba, “Developing a 3D Printable Thermoplastic Elastomer”, presented at the 26th Annual Conference on Industry, Engineering and Management Systems, March 2020.
  • Weheba G., and Esfandiarpour Borujeni E. B., “Repeatability and Reproducibility Study of a Portable Coordinate Measuring Machine” the 24th annual conference on Industry, Engineering and Management Systems, March 2018.
  • Weheba G., “A Pilot Implementation of the Drum-Buffer-Rope and Reported Benefits” the 24th annual conference on Industry, Engineering and Management Systems, March 2018.
  • Weheba G., “A Usability Assessment of Statistical Analysis Software Package,” the International Conference on Industry, Engineering and Management Systems, March 2017.
  • Weheba G., “Innovation Management in Small Business: Best Practices,” International conference on Industry, Engineering and Management Systems, March 2016.
  • Weheba G., “Integration of the Drum-Buffer-Rope and Manufacturing Resource Planning: A Case Study,” 21st International Conference on Industry, Engineering and Management Systems, March 2015.
  • Weheba G., and Jaradat* B., “Cost of Software Quality,” 20th International Conference on Industry, Engineering and Management Systems, March 2014.
  • Safai* N., and Weheba G., “A Fully Bayesian Approach to Verifying a Reduction in the Process Variance,” The International Conference on Industry, Engineering, and Management Systems, March 2012.
  • Weheba G., and Pandiripalli B., “Repeatability and Reproducibility Studies: A Comparison of Techniques,” the International Conference on Industry, Engineering and Management Systems, March 2011.
  • Weheba G., and Safaie* N., “Recent Developments in Bayesian Process Monitoring Techniques: A Literature Review,” International Conference on Management of Technology, April 2009.
  • Weheba G., “Advances in Rapid Tooling for Composite Manufacturing,” International Conference on Management of Technology, May 2007.
Professional Experience

Â鶹ĆĆ˝â°ć State University, Â鶹ĆĆ˝â°ć, KS

Professor                                                                                                             2012-Present

Associate Professor                                                                                          2005-2012

Assistant Professor                                                                                           2000-2005

Department of Industrial, Systems & Manufacturing Engineering

  • Teaching Quality Engineering, Statistical Quality Control, Design of Experiments, Reliability Engineering, Rapid Prototyping and Engineering Economy.

University of Central Florida, Orlando, FL

Visiting Professor                                                                                               1997-1999

Department of Industrial Engineering and Management Systems

  • Taught Engineering Statistics, Operations Research, Quality Engineering, Precision Engineering and Engineering Economy at the graduate and undergraduate levels including Honor, Media Assisted and Interactive Television classes.

Research Associate                                                                                            1997-1999

Reverse Engineering and Rapid Prototyping Research Project

  • Work with teams of clients to identify rapid prototyping needs and design precision measurement techniques and 3D scanning processes.

Menoufia University, Egypt

Assistant Professor                                                                                            1996-1997

Department of Production Engineering and Mechanical Design

  • Taught Quality Control, Industrial Statistics, Manufacturing Technology, Operations Research and Precision Measurement.

University of Central Florida, Orlando, FL

Instructor                                                                                                             1992-1996

Department of Industrial Engineering and Management Systems

  • Taught Probability and Statistics, Engineering Economics, and Manufacturing

Research Assistant                                                                                             1991-1992

NASA Productivity Improvement Project

  • Developed key design components that include ergonomic principles to reduce Orbiter Turnaround Time and improve workplace design.

Menoufia University, Egypt

Instructor                                                                                                               1981-1991

Department of Production Engineering and Mechanical Design

  • Taught Industrial Statistics, Manufacturing Processes, and Measurement
Awards and Honors
  • Alumni of the Year, Department of Industrial Engineering and Management Systems, University of Central Florida, Orlando, FL, 2019
  • Academy of Effective Teaching Award, Â鶹ĆĆ˝â°ć State University, 2013
  • Polished Professor Award, College of Engineering, Â鶹ĆĆ˝â°ć State University, 2010
  • Fellow of the American Society for Quality, 2008
  • Leadership in the Advancement of Teaching Award, Â鶹ĆĆ˝â°ć State University, 2007-2008
  • Dwane and Velma Wallace Outstanding Teaching Award, Â鶹ĆĆ˝â°ć State University, 2008
  • Polished Professor Award, College of Engineering, Â鶹ĆĆ˝â°ć State University, 2008
  • Boeing Fellow, College of Engineering, Â鶹ĆĆ˝â°ć State University, 2005-2006
  • Polished Professor Award, College of Engineering, Â鶹ĆĆ˝â°ć State University, April 2006
  • Dwane and Velma Wallace Outstanding Educator Award, Â鶹ĆĆ˝â°ć State University, 2002-2003
  • Polished Professor Award, College of Engineering, Â鶹ĆĆ˝â°ć State University, April 2002
Grants
  • Human-Agent Teaming for the Future of Work in Aircraft Manufacturing, NSF, 1/01/222 – 12/31/2022, $149,965 (Co-PI)
  • Rapid Prototyping Laboratory, College of Engineering, Equipment acquisition proposals,
    $45,000, 2019 (PI)
  • Additive Manufacturing Assistantship Grant, AMETEK, $25,000, 2019 (PI)
  • Audit-Calc: A software for Audit Day Calculation According to the 9104-001 Aerospace Standard, International Aerospace Quality Group (IAQG), $120,000, 2012-2017, (PI)
  • Performance Assessment Observation and Analysis, Bombardier Aerospace, Learjet,
    $69,000, Jan 2007 –May 2010, (PI)
  • Modeling and Evaluation of Plant Layout Design, Bombardier Aerospace, Learjet,
    $23,144, August-Dec., 2008, (Co-PI)
  • Rapid Fabrication of Composite Lay-up Tools, Aircraft Design and Manufacturing Research Center (ADMRC), $103,643, 2004-2006, (PI)
  • Achieving NADCAP Requirements Using Six Sigma Methodology, Chrome Plus International, $2,112, September-December 2006, (PI)
  • Reverse Engineering as a Tool for Process Planning, R&R Precision Machine, $3,000, June –August 2006, (PI)
  • Performance Analyses Using Work Sampling Techniques, Bombardier Aerospace Learjet, $41,544, 2005-2006, (PI)
  • AS9100 Registration Difficulties and Organizational Benefits: A Customer Satisfaction Survey, Cessna Aircraft, $4,000, February-May 2005, (PI)
  • Innovation in Aircraft Manufacturing through System-Wide Virtual Reality Models and Curriculum Integration,” NSF partnerships for Innovation, $597,810, 2002-2004, (Co-PI)
    Use of Virtual Reality to Enhance Speech and Skill Development, Multidisciplinary Research, Office of Research Administration, $5000, 2003, (PI)
  • Solid-imaging System, Office of Research Administration, WSU, $103,000, 2002 (PI)
Areas of Service
  • Conference chair, International Conference on Industry, Engineering and Management Systems (2019-present)
  • Program coordinator, Additive Manufacturing graduate certificate Program, Â鶹ĆĆ˝â°ć State University, (2019-present)
  • Graduate Faculty Scholar, College of Graduate Studies, University of Central Florida Appointed (2013-present)
  • Member of the editorial board, Journal of Management and Engineering Integration (2008-present)
  • Track chair and member of the advisory committee, Annual Conference of the International Association for Management of Technology (2008- present)
  • Track chair and session organizer, General Aviation Technology Conference, SAE International (2006)
  • Session organizer and Chair, National Student Paper Competition, American Society for Quality, World Conference (2005-2006)
  • Member, Coalition for the Advancement of Careers in Health Care, Â鶹ĆĆ˝â°ć Chamber of Commerce (2004-2005)
  • Examiner and team leader, State Quality Award Program, Kansas Award for Excellence (2003- 2005)
  • Reviewer, Computers and Industrial Engineering Journal (2000-2005)
  • Member, AS9108 Quality Standard, Statistical Product Acceptance Requirements Team, the International Aerospace Quality Group (2002-2003)
  • Reviewer, Operations Research and Service Enterprise Engineering Program, the National Science Foundation (2002)
Additional Information
  • Certified Quality Engineer (CQE), ASQ Certification # 32273 (1994-present)
  • Founding Faculty Advisor, WSU-ASQ Student Branch, 2001-present
  • Faculty Advisor, WSU-Saudi Students Association (SSA), 2010-present
  • Member and Faculty Advisor, Society of Manufacturing Engineers (SME) 2005-2007
  • Member of the Board of Examiners, Kansas Award for Excellence Foundation 2003-2005
  • Member of the American Society for Engineering Education (ASEE) 2004-2005
  • Member, Alpha Pi Mu, Industrial Engineering Honor Society, University of Central Florida