Composite Structural Engineering Technology  (CSET) Course

Online Course 鈥 Hands-on Lab 鈥 麻豆破解版, KS

 


Registration

 As space is limited, register quickly to reserve your spot! (If class fills prior to registering, students are placed on a waiting list for possible future classes.)


Dates

CSET-A: September 16 - October 27, 2024
CSET-B: October 28 - December 8, 2024

Optional Hands-on Lab: October 1-2, 2024

 


Fees

CSET Course Registration Fee

Tuition per student is $900.00 for each online module. Registration is limited to 24 individuals and will be accepted on a first come first serve basis. Course materials are included with tuition. You may register and pay on-line.

All cancellations must be made in writing. A 15% administrative fee will be assessed on all cancellations (this includes purchase orders). There will be no refunds within 7 days of the start of the course. WSU reserves the right to cancel the program due to lack of enrollment. In that event, WSU will refund any pre-paid course fees but will not be responsible for any incidental or consequential damages.

Hands-on Lab Fee

The optional hands-on laboratory will be an additional fee of $1200 per person.  Please note this is a non-credit course and the class must have 15 registered in order to move forward. A decision will be made two weeks prior to the lab start date. If the lab is cancelled due to low enrollment a full refund will be issued. 

 


About the Course

This course covers the essential topics pertaining to composites engineering and the certification process. Its contents provide students with an awareness of the composites engineering process framework through course materials and practical applications through online discussions. Topics include engineering, manufacturing, maintenance, and certification of composite materials associated with civil aircraft structures. The course content is in accordance with FAA AC 20-107B (Composite Aircraft Structure). CSET-A is prerequisite to CSET-B, with each course 6 weeks in length.

This course was developed through the collaboration of 麻豆破解版 State University, industry subject matter experts, and the Federal Aviation Administration. The course is taught online, includes all teaching materials, and features real-world discussions facilitated by those with subject matter expertise and FAA representatives. Depending on prior knowledge, experience, and level of student involvement, attendees typically spend six or more hours per week, reviewing materials, participating in online discussions, and testing their knowledge. 

After finishing a 1-week period of self-study of fundamental composites and successfully completing an examination in CSET-A, students proceed to more advanced topics through an on-line, interactive learning experience via Blackboard for the next five weeks. The six-week module, CSET-B, follows CSET-A in a similar teaching format. Students may take CSET-B immediately after CSET-A, or as an option, delay CSET-B enrollment until a later offering for schedule flexibility. Teaching methodology includes online discussions facilitated by subject matter experts, content in PowerPoint slides available for download, and audio/visual aids. As an asynchronous learning process, the schedule is flexible, with students determining their time schedule and participating at their convenience during each week of class.

Course Objective

Students will describe engineering principles for substantiating composite airframe structures during all stages of aircraft product certification.

 Who Should Attend?

鈥 Professionals responsible for the engineering of composites.
鈥 Individuals having a general background in composites and/or engineering technology.
鈥 Civil aviation regulatory authorities and industry designees who participate in the certification of composite structures.

 Prerequisite

Students will review summary reading material on basic composite technology during the first week of the online class, followed by an assessment to measure students understanding of prerequisite content. After successfully completing the online assessment, students are given access to the CSET-A course.

 Course Topics

Composite Applications
Material, Processing, and Fabrication Development
Design Development
Structural Substantiation
Manufacturing and Maintenance Interface
Additional Topics: Flutter, Crashworthiness, Fire Safety and Lightning Protection

 


Hands-on Lab

October 1 & 2, 2024 
National Center for Aviation Training
| 4004 North Webb Rd. 麻豆破解版, Kansas
National Institute for Aviation Research (WSU campus) | 1845 N. Fairmount, 麻豆破解版, Kansas 67260

This optional laboratory provides students with hands-on experience on prepreg cutting, manual
layup and bagging of simple laminated composite parts, non-destructive inspection and scarf repair. The hands-on lab is strongly recommended for individuals who attend CSET or CMfgT courses.

View Agenda  

 


Meet the Instructors

Charles Seaton

Charles Seaton has over 30 years of experience in aerospace businesses involving aircraft design, manufacturing, education and aircraft modification.  He has led and consulted in global education initiatives which promote safe practices with composite materials in aerospace and other industries. He has taught and developed curricula with international composite experts and educators in the field of composite technology, repair and engineering for over ten years.

Christos Kassapoglou

Christos Kassapoglou worked at Beech Aircraft (1984-1987) heading the analysis effort for the certification of the all-composite Starship I.  He then joined the Structures Research group of Sikorsky Aircraft (1987-2001) where he worked on the development of analysis methods focusing on damage tolerance of composites and weight and cost optimization of composite airframe structures.  Since 2001, he has been consulting with various US and European companies on design and analysis of composite structures and worked (until 2016) as an Associate Professor at Delft University of Technology in the Netherlands.  In 2017, he joined Lockheed Martin. He has over 70 publications in scholarly journals on composites analysis and design, cost-weight tradeoffs of composite structures, damage tolerance and fatigue of composites.  Two books: (1) Design and Analysis of Composite Structures, 2nd Edition, Wiley, 2013, Modeling the Effect of Damage in Composite Structures, Wiley, 2015, and a book chapter, "Structural Design 鈥 Tradeoffs" in Encyclopedia of Aerospace Engineering, eds R. Blockley and W. Shyy, John Wiley: Chichester. 2012.

Course development was supported by FAA and industry engineers, bringing decades of experience in both regulatory and engineering practice to the course development. In addition to the above instructors, FAA representatives will participate in the online discussions when aviation regulations, guidance or policy questions arise.

Cindy Ashforth, Senior Technical Specialist for Composites, FAA Aircraft Certification Service, Policy and Innovation Division

Ms. Ashforth has over 25 years鈥 experience testing and certifying composite structures, as both a certification manager and composite materials specialist. As one of the FAA鈥檚 subject matter experts for advanced composite materials, she provides technical advice on rule making activities, writes guidance documents, develops and delivers educational materials, and assists in certification projects and continued operational safety activities related to composite applications.

Dr. Larry Ilcewicz, FAA Chief Scientific and Technical Advisor (CSTA) for Composite Materials

Mr. Ilcewicz started work with the FAA in 1998. Since joining the FAA, he has supported many small airplane, rotorcraft, and transport aircraft certification programs. He has also worked on accident investigations and service problems involving composites. These experiences helped develop an international plan for composite safety and certification initiatives called the FAA Aviation Safety Composite Plan.

Angie Kostopoulos, Aerospace Engineer, Composite Technical Specialist, FAA Policy and Innovation Division

Ms. Kostopoulos has over 25 years鈥 experience certifying  Part 23 aircraft composite structures, as both a certification Program manager and composite Technical specialist. As one of the FAA鈥檚 Composite Technical Specialist, she supports certification projects and continued operational safety activities related to composite structures for small aircraft/jets as well as rotorcraft.  She also provides input and assists with the development of guidance and policy using her certification experience with the various composite Type certification projects and delivers educational materials.

 


What We've Heard

  • I wish I had this education years ago, as it has definitely reinforced the protocols that I have picked up along the way. For a new designer in the aerospace field, this would be a great tool to shorten the learning curve. (E.B., Stress Engineer)
  • I thought the structure of the class and the combination of presentations, exams, and forum discussions was outstanding for an online course. I thought it was very well implemented and would definitely consider a similar course in the future. (P.T., Stress Analyst (design, testing, and certification of CFRP horizontal stabilizer skins))
  • There鈥檚 so much FAA and industry guidance on composites, that having it all distilled into a course like CSET allowed me to write a clear certification methodology in just a few weeks. (G.S., Consultant Structures DER and ODA Unit Member)
  • The instructors encouraged the participants鈥 interaction by asking questions and did provide a lot of information from their experiences that is not included in the course contents. (L.S., Research and Development Engineer)
  • It's the best course on the market for airworthiness authority delegates who want to have a more in-depth understanding of the particularities in certification and continuing airworthiness of commercial aircraft with primary composites structures. This is the perfect course for new delegates or experienced delegates in metallic structures to understand what is so particular with composites structures certifications. (M.C., Head of Stress and M&P, In-Service Engineering - TCCA)

Registration Questions & More Information

For questions regarding your registration or the registration process, please contact the WSU Conference Office.

Phone: 316-978-6493
Fax: 316-978-3064
Email: conference.office@wichita.edu